胶片隔离剂（粉） - 公司动态 - 常州市五洲化工有限公司-官网-橡胶防老剂-高分散白炭黑-二氧化硅-高分散氧化锌-氧化锌

产品特性
胶片隔离剂YT-S933是一种粉状胶片隔离剂，它能防止末硫化及混炼胶片在储存中的粘连，是由天然无机物和活性剂等组成。对不同的软性和粘性的胶片都有很好的润湿隔离性。在橡胶硫化时能很好的溶入橡胶中，不会影响胶料的物性及其他性能特征。

应用领域
胶片隔离剂YT-S933推荐使用浓度依胶料粘度不同，兑水比例为1:30~1:45，由生产车间气温及橡胶的组成和混胶的邵氏硬度决定。先将溶化池中放入所需要求量的清水，再将本品加入池中搅拌。经过搅拌所有物料溶化后正常操作。通常在夏天和一些易粘胶应使用高浓度；反之，则使用低浓度。本品在混炼胶片表面形成一层弹性薄膜，起到很好的隔离效果，使胶片不粘连。因而可避免后道工序操作的麻烦，提高工作效率。使用过程中本品在设备表面有轻微的软性沉积，很容易除去，有防腐性能。该产品在水中分散时不会产生泡沫。

技术指标

组成：无机填料和活性剂等混合物
外观：浅灰白色粉体
PH值：8~12（3%水溶液）
灰分： 56~66 %（950℃/4h）

包装和储存
20kg/包，纸塑袋。储存在阴凉干燥处，在满足以上条件下储存。保质期限为一年，生产日期标注在包装袋标签的批号上面。

安全和运输
根据运输法律，YT-S933属于非危险品，按非危险品运输。正确使用本品不会造成任何伤害。

特别说明
以上产品技术信息及数据是基于最好的有效信息之上，并不提供任何保证且无侵犯任何专利之嫌。用户在使用之前有责任对产品的适应性进行检测。

Rubber Film release agent YT-S933（Dusting agent）

Product introduction:
YT-S933 is a kind of powder form film separant. It can prevent the adhesive of unvulcanized rubber and mixed film in storage. It is composed of natural inorganic substances and active agents with good wettability and isolation for different soft and viscous rubber films. It can be dissolved well in rubber during vulcanization without any effect on physical and other properties of rubber compound.

Application
Rubber film separant YT-S933 uses different concentration according to the viscosity of the rubber compound, water ratio of 1:30 to 1:45, depending on the temperature of production workshop, composition of rubber and the Shore hardness of the mixture. First put required amount of water into the dissolution tank, then add the product into the tank and stir. After stirring all materials to dissolve, the operation is normal. Usually high concentration should be used in summer and low concentration should be used in winter. This product forms a thin layer of elastic film on the surface of the mixed film, which has a good isolation effect and keeps the film from sticking. Therefore, it can avoid the trouble of back-end production operation and improve work efficiency. During usage, the product has slight soft deposition on the surface of the equipment. It is easy to remove with anti-corrosion performance. The product does not produce foam when dispersed in water.

Technical data
Composition:   Mixture of filler and activator
Appearance:   Light gray-white powder
PH value: 8-12 (3% aqueous solution)
Ash content:    56-66% (950 ℃/4h)

Packaging and storage
20kg/bag, paper-plastic bag. Store in a cool and dry place. Under the above conditions, shelf life is one year and the date of production is marked on the batch number of the package label.

Safety and transportation
According to transport law, YT-S933 belongs to non-dangerous products and is transported according to non-dangerous goods. Proper use of this product will not cause any harm.